The Xone:92 represents the culmination of everything we've learned from the DJ market. It's the result of something we've done since Day One - listening to DJ's. The result is a versatile mixer that promises to fulfill every wish list, with features to suit all styles from breakbeat to techno, trance to house: 6 stereo channels (4 phono or line, 2 mono/microphone or stereo return)
2 auxiliary sends selectable pre/post fader (and crossfader)
MIDI output from VCF 1+2, crossfader, LFO (MIDI clock), dedicated data control and start/stop button
New twin-rail VCA channel faders or high quality VCA rotary faders
2 independent stereo mix outputs
2 VCF filters - any performance channel can be assigned to either filter and either side of crossfader
2 x independent Low Frequency Oscillators (LFO) for filter modulation
Active crossfader allowing contour to be set from smooth to scratch mix
Custom illumination showing status of all performance switches
4 band EQ - high definition of frequency bands, with infinite kill on HF and LF; wide Q for cut, narrow Q for boost
Dedicated booth output
Metering - extensive channel, output and cue metering
Intelligent cue system allowing pre or post EQ monitoring
Monitor section - includes post EQ switch; split cue and mix to cue balance 2 x headphone outputs and 3.5mm jack
Talkover facility on mono/microphone channel attenuates music by 20dB
Dedicated clean feed record output

The MM 8x features eight stereo Inputs. Each of the four assignable buses contains its own three band EQ, allowing separate equalization of different sources. The four faders are grouped in two pairs, allowing a custom mix of two input sources on each side of the crossfader. The MM 8x incorporates new Active Crossfader technology that combines state of the art voltage controlled amplifier design with a professional studio quality, dual-rail crossfader control. Combining Active Crossfader technology with a removable crossfader, sets new standards for performance, reliability and serviceability. Virtually all crossfader noise is eliminated. Channel to channel crosstalk is greatly reduced and the off isolation of the faded channel is greatly increased. Active Crossfader technology dramatically increases the service life of the crossfader. In the unlikely event of crossfader failure, there is no loss of signal. If a crossfader should become rough or noisy, it is possible to hot swap the control during a performance with no interruption of the audio signal. Simply use the input faders to set the audio levels while the crossfader is out of service.

Each of the four Phono (RIAA) Inputs switch to Line Level via rear panel switches. Both the Main and Aux microphone Inputs route through Bass and Treble controls. The Main microphone input has an Effects Loop.

The main program signal includes a stereo Master Loop for equalization or processing. The Tape Output can be switched to exclude the Master Loop signal and record the unprocessed program signal.

The MM 8x does not scrimp on its powerful Headphone Cueing system in which one or more channels may be cued at one time. The metering can be switched to monitor stereo main output or mono cue on one side and mono program on the other.

The MM 8x has recessed top mounted jacks provide room for cabling in tight DJ coffins or racks without sacrificing its compact 4" depth.

• Eight Stereo Inputs
• Additional Aux Stereo Input & Output
• Phono Inputs Line Level Convertible
• Separate EQ on each Input Fader
• Front Panel Hot-Swap Active Crossfader
• Front & Rear Panel Main microphone Inputs with EQ & Loop
• Aux microphone Input with Line Level Capability
• Program Stereo Effects Loop
• Versatile Headphone Cueing
• Program/Cue Metering
• UL/CSA Remote Power Supply (120 VAC)
• CE (Low Voltage & EMC) Remote Power Supply (230 VAC)

The Rane SL 3 coupled with Serato Scratch Live is the ultimate solution for bridging the analog world of vinyl and the digital world of computer audio files. Using regular turntables *or* CD players, you can scratch and mix files from your computer''s hard drive, add in a live microphone input for scratching, and even bypass to standard vinyl if you wish. Scratch Live is the complete digital solution for the vinyl junkie -- take your entire collection wherever you go and leave your precious vinyl at home! The SL 3 interface connects one *or* two standard vinyl *or* CD turntables to your computer. This extremely rugged, portable, high quality, bus-powered USB interface features two switchable phono *or* line inputs, a microphone input, two line outputs, and pass thru outputs for the phono/line and microphone. The included 12 vinyl records each have a Serato exclusive and unique control signal which allows Scratch Live to track the motion of the record, simulating the same movement with digital audio. Due to Serato''s proprietary control scheme, the result is a feel and sound indistinguishable from playing vinyl. As a producer and DJ, the track you finished today can be played on a real turntable tonight.